11:39The Ingenious Design of the Aluminum Beverage Can
engineerguy19.4M views
Bill Hammack walks through every design decision in the aluminium beverage can, from the domed bottom to the necked top.
203,959 videos · How machines, structures and electronics work — and how to build them.
11:3919.4M views
Bill Hammack walks through every design decision in the aluminium beverage can, from the domed bottom to the necked top.

474K views
Bell Labs' J.N. Shive uses a mechanical wave machine to show reflection, standing waves, resonance and impedance matching — the ideas behind transmission lines.
15:51488K views
How semiconductors work: doping, P-type and N-type silicon and the PN junction.
35:154.85M views
How heat pumps move heat instead of making it, why they reach efficiencies above 100%, and how they handle cold climates.
13:39791K views
How to understand most op-amp circuits using two simple rules.
30:01288K views
Tim Hunkin's remastered Secret Life of Machines episode on the vacuum cleaner: its history, mechanics and quirks.
25:10465K views
CuriousMarc opens an HP 5061A caesium beam clock and explains, module by module, how it locks to an atomic transition.
30:23135K views
The Secret Life of Machines (remastered): how the central heating system works and how it developed, explained with Hunkin's cartoons and working demonstrations.
13:24774K views
A graphical, intuitive picture of what the Laplace transform does.
10:30Intro233K views
Introduction to Dan Gelbart's 18-part series on building prototypes: the tools, materials and mindset of fast hardware iteration.
14:591.36M views
Laminar and turbulent flow, the Reynolds number and boundary layers.
31:24128K views
The Secret Life of Machines (remastered): how the television works and how it developed, explained with Hunkin's cartoons and working demonstrations.
11:052.23M views
The area moment of inertia and why I-beams are shaped the way they are.
24:35701K views
Steels and heat treatment: phases, the iron-carbon diagram, quenching and tempering.
16:401.17M views
The Nyquist stability criterion: mapping the open-loop response to judge closed-loop stability.
9:131.32M views
Why closed-loop (feedback) control beats open-loop and how the loop is structured.
31:17126K views
The Secret Life of Machines (remastered): how the telephone works and how it developed, explained with Hunkin's cartoons and working demonstrations.
26:58346K views
How to start designing a real control system, from requirements to model to controller.
10:151.91M views
Torsion of shafts: shear stress, angle of twist and polar moment of inertia.
29:4592K views
The Secret Life of Machines (remastered): how the lift (elevator) works and how it developed, explained with Hunkin's cartoons and working demonstrations.
8:23784K views
Fatigue failure: S-N curves, endurance limits and how cyclic loading breaks parts.

3.52M views
Technology Connections opens an electromechanical pinball machine to show how relays, score reels and switch matrices run the game logic.
7:44Intro1.75M views
What PID control is and what each of the proportional, integral and derivative terms does.
3:39Intro475K views
Introduction to Michelson's 1890s harmonic analyzer, a mechanical computer that performs Fourier analysis with gears and springs.
38:312.36M views
An in-depth 3D-animated tour of an ASML EUV lithography machine: light source, mirrors, wafer stage and masks.
12:45Intro1.44M views
What Bode plots show about a system's frequency response and why engineers use them.
30:3580.7K views
The Secret Life of Machines (remastered): how the electric light works and how it developed, explained with Hunkin's cartoons and working demonstrations.
22:151.29M views
How beams deflect under load: the deflection equation, boundary conditions and standard cases.
30:333.04M views
Traces how humans learned to make precise flat surfaces, screws and measurement — the foundations of modern manufacturing.
14:192.09M views
How wings generate lift: pressure distribution, circulation and the common misconceptions.

857K views
Boeing aerodynamicist Doug McLean dismantles popular wrong explanations of lift and explains what really happens.
24:59Intro283K views
Introduces the Smith chart: plotting impedance, reading VSWR, and how transmission lines and matching show up on it.
10:02Intro2.2M views
Stress and strain: normal and shear stress, Hooke's law and the stress–strain curve.
32:477.13M views
Ben Eater builds a VGA video card from logic chips on breadboards, explaining video timing and pixel generation.
31:35213K views
The Secret Life of Machines (remastered): how the washing machine works and how it developed, explained with Hunkin's cartoons and working demonstrations.
11:541.06M views
Using medieval cathedrals, Bill Hammack shows that engineering works by rules of thumb and iteration, not just applied science.